Add the
desired amount of Bond� to work with to hot water (113 �F/45 �C). Take
care not to overheat Bond� as it will be difficult to safely handle. (Do
not boil water).
Bond�
will slowly change from white to clear in hot water as it melts and
clumps together. Once Bond� is clear, it is ready to work with.
Remove it
from the water and begin to knead it to work out any trapped air or
water. Bond� can now be worked into any shape or form required to secure
coral to rock work or to bond rock work together.
As Bond� cools, it hardens and returns to its original
white color. This takes approximately 10 - 15 minutes but will vary
depending on the temperature Bond� is heated to, as well as room
temperature. If necessary, Bond� can be reheated and reworked multiple
times until desired results are achieved.