- Complete Professional Marine Salt Mix for Reef or Fish Only Systems
- Contains All Essential Major, Minor & Trace Elements
- Enhanced Buffer Levels; Reaches a Stable pH Shortly After Mixing
- Enhanced Calcium, Magnesium and Potassium Levels
- Nitrate, Phosphate & Ammonia Free
Fritz ProAquatics Reef Pro Mix (RPM) is manufactured using only the
highest quality raw materials. Formulated by researchers and marine
scientists, RPM contains all of the necessary major and minor elements
of natural sea water that are utilized by living marine and reef
animals. Correct pH and buffering capacity, essential minerals and trace
elements have been added in precise ratios to ensure a correctly
blended mix for the health and longevity of your livestock.
RPM is manufactured in our own facility in small batches to ensure
complete quality control, rather than outsourced to generic chemical
blenders with uncertain quality. Our salt blending equipment is devoted
solely to the production of aquatic products, preventing contamination
issues. Fritz�s unique production process promotes a uniform particle
size minimizing stratification of the salts. Each batch is assigned a
lot number and tested by in-house quality control to ensure its chemical
quality and purity before it is shipped.
RPM is used by public aquariums, zoos, research institutions,
destination retail locations, adventure parks and hobbyists worldwide.
For best results It is important to follow proper mixing instructions
when using salt with elevated trace elements, like FritzPRO RPM.
When Mixing RPM, it is best practice to use RO/DI water, quality
checked by a TDS meter (TDS should be less than 10ppm, 0 is preferred).
Fill Clean Mixing container (dedicated for aquarium saltwater) with
desired amount of Saltwater to be prepared. We recommend using water
between 70 � 75 degrees before adding RPM. Slowly add RPM into the RO/DI
to avoid a sharp increase in temperature, and an over saturation of
Salt. This helps to prevent precipitation of Calcium, Alkalinity and
other trace elements. It is best practice to use a mixing pump and an
air stone when mixing RPM. This will also help to avoid concentrated
areas of material and precipitation. Using a properly calibrated
refractometer, bring the salinity between 28-35 PPT (1.021-1.026
Specific Gravity). Once mixed to a clear solution, add a heater to the
water to bring to the current temperature of your aquarium (78-80).
Please allow 2 hours before doing a water change. If water does not mix
clear please contact us for further mixing tips before doing a water
DO NOT MIX DRY SALT IN SYSTEMS WITH LIVESTOCK PRESENT
STORAGE: Reseal bucket tightly to keep moisture out of dry mix. Store in a cool dry place.