Replacement pad/felt for the Glass Aquarium Cleaner (Medium)
Floating glass aquarium cleaner
(Note: Contains 1 pad and 1 felt)
Item #00126

• Easy removal of algae from glass/acrylic surfaces
• No longer knock over decorations, damage corals and invertebrates
• No longer get your hands submerged into the water of the fish tank
• Time/money saver on maintenance
• Large cleaning surface area makes the job quick and efficient
• Stays free of debris
• Can be maintained attached to aquarium surface
• Strong, high-quality neodymium rare earth magnets
• Available for glass and acrylic aquariums
• Can be used on freshwater and saltwater tanks
• Magnet does not lose strength over time
• Easy retrieval of inner magnet

Instructions on how to change the pad/felt:

• Remove old pad/felt entirely without damaging the plastic surface of the magnet.
• Apply mineral spirits on a cloth and rub plastic surface until all excess glue is cleared (Use latex gloves).
• Wait until plastic surface is completely dry before applying new pad/felt.
• Peel back paper backing from new pad/felt approximately a quarter of the way.
• Line up the new pad/felt with the plastic surface area of the magnet.
• Apply pressure to the pad/felt are that has been peeled off so it glues on to the plastic surface of the magnet.
• Apply pressure to the rest of the new pad/felt as you slowly remove the rest of the paper backing (This will avoid any air bubbles to be formed between the plastic surface and pad/felt).

Note:

• Felt is applied to the magnet that contains the logo Mag-Float®
• Pad is applied to the magnet that does not contain the logo Mag-Float®