Description

Concentrated solution for adding molybdenum, rubidium, vanadium, tungsten, tellurium, and hafnium if there are deficits in the aquarium.

Molybdenum, vanadium, and tungsten are associated with key conversions in the metabolism of corals and other marine animals and algae, rubidium as an alkali metal is important for the ion balance, tellurium and hafnium are trace elements in seawater, the function of which is not yet known.

The Tropic Marin Block System uses an indicator element to dose-related trace elements that are consumed in the same ratio. Often, their levels are below the detection limit of the analyzing meters and cannot be measured correctly.

Elements, Chemical Symbol and contents:

Molybdenum – Mo – 150 mg/l (ppm)

Rubidium – Rb – 150 mg/l (ppm)

Vanadium – V – 60 mg/l (ppm)

Tungsten – W – 0.75 mg/l (ppm)

Tellurium – Te – 0.15 mg/l (ppm)

Hafnium – 0.15 mg/l (ppm)

Benefits

• Helps to reliably and accurately add molybdenum, rubidium, vanadium, tungsten, tellurium, and hafnium to correct deficits
• Also accounts for dosing any elements that are below the detection limit of the analyzing meters
• Easy dosing with the integrated dropper and dosing cap
• Suitable for both a manual dosing as well as for dosing pumps

Ingredients

Water, inorganic compounds of molybdenum, rubidium, vanadium, tungsten, tellurium, and hafnium.

Application & Dosage

2 ml per 100 l/ 26. US. gal. aquarium volume increase the concentration levels of molybdenum by 3 µg/l (ppb), of rubidium by 3 µg/l (ppb), of vanadium by 1.2 µg/l (ppb), of tungsten by 0.015 µg/l (ppb), and of tellurium and hafnium by 0.003 µg/l (ppb) each.
Maximum dosage: 4 ml per 100 l/ 26. US. gal. daily.

Store in a cool and dark place.